20W锂电池太阳能手提发电机

20W锂电池太阳能手提发电机

Features:
1. Integrated design, Handiness, portable, waterproof structural design
2. Environmental protection and energy saving, Exquisite designs Product materials adopt national environmental standard of ultra thin complex plastic materials. 
3. Apply to outdoor traveling, family, subrubs, island, Border Post, fishing-boat and so on, as using no power or need power area. 
4. With LCD intelligent display system using  status, indicate battery capacity, charging status, fault indicate, and indicate whether AC output or DC output on-status. 
5. Adopt intelligent control, with short circuit, overload and unique prevent reverse connect protection, when full charge or over-discharging will automatic cutoff and recovery protection function. 
6. Multifunction charging ways, It can using the panel of system to charge directly, electricity AC100V charging or external connecting DC12V-18V voltage to charge system. 
7. The system can load various of voltage of the small power home appliances or electronic products, with AC100V or DC 12V/ 5V voltage. As low power TV, energy saving lamp, fan, laptop, MP3, MP4, IPAD, iphone, cell phone, digital camera and so on. 

 
Product charge operation method 
1, Solar charge method 
Open the machine's cover and Put it in the sun, it will be enter the solar charging state, and the battery capacity indicator is running. When the battery is full of electricity after the battery symbol display the full lattice, the battery capacity indicator is stop. at the same time the inverter starting protection function, and close the charging power. 
 
2, City Electric charge method 
Use the AC charge cable connect the machine's AC IN & the electricity power, then the battery capacity indicator is running. that show the product is charging .When the battery is full of electricity , the battery symbol display the full lattice, the battery capacity indicator is stop.at the same time the inverter starting protection function, and close the charging power. 
 
3, Car charge 
Use the car cable to charge, connect the machine's 13-18V DC IN & the Car power, then the battery capacity indicator is running,  that show the product is charging .When the battery is full of electricity , the battery symbol display the full lattice, the battery capacity indicator is stop.at the same time the inverter starting protection function, and close the charging power. When the vehicle is not open the engine , please don't use the car charging. Otherwise the car's battery is will be over. 
 
Out put operation method -Load operation
1, AC100V Load operation The load connect to the AC OUT, Open the master power switch, and press the AC ON/OFF switch button,display AC OUT,that show the product AC Output normal. When used without the AC load, please make sure the AC ON/OFF switch is power off,It can reduce the internal loss 
 
2, DC12V Load operation The load connect to the 12V Interface, Open the master power switch, and press the DC ON/OFF switch button,display DC OUT,that show the product DC output normal
 
3, 5V USB Load operation The load connect to the 5V DC OUT, Open the master power switch, and press the DC ON/OFF switch button, display DC OUT, that show the product DC output normal 
 
4, With 3W LED operation Open the master power switch, press the 3W LED switch, It power ON; press the switct one more time, the LED flash; press the switct on third, It LED power off
 
5, The LCD have a normal & error display, normal: Electricity shortage or short circuit: ERROR flashing that show is not have power out put, please check the load is too large or not, Short circuit.